Car Wiring / October 25, 2017 / Anaelle Huston.
Some ancillary components can be operated without the ignition turned on by turning the switch to the auxiliary position. A radio is usually wired through this switch, so that it can be played with the engine off.
Printed circuits are plastic sheets on which copper tracks have been printed. Components are plugged directly into the tracks. A few modern cars have flexible printed circuits. The copper tracks are printed in ribbons of flexible plastic, which replace the whole wiring system.
Apart from the main charging, starting and ignition circuits, there are other circuits that power lights, electric motors, the sensors and gauges of electrical instruments, heating elements, magnetically operated locks, the radio and so on. All Circuits are opened and closed either by switches or by relays - remote switches operated by electromagnets.
To guard against this, ancillary circuits have fuses. The most common type of fuse is a short length of thin wire enclosed in a heatproof casing often glass. The size of the fuse wire is the thinnest that can carry the normal current of the circuit without overheating, and it is rated in amps.