Other Wiring / September 1, 2017 / Ophelia Purdy.
In our experience, we disassemble, repair and reassemble objects we can see and touch. Our goal is a repair. However, to repair today vehicles, we must expand our understanding beyond things we can touch, see and use wrenches on. We must apply the technician approach to learning, information gathering and analysis.
You will need to use the ohmmeter as an ohmeter and not as a continuity checker for the next step in the procedure. You will want to use the lowest ohm scale your meter offers, as the typical winding resistance in motors such as these is less than 100 ohms. If the motor is a permanent split-capacitor motor, you are going to be looking for common and speed taps of the winding.
Bonding should be by the widest practical means. Wide cable tray is effective when it is made of zinc plated steel and carefully bonded at the ends to control panel and motor frame. Zinc plated sheet steel channel is also effective. The fact that the width is folded into a U shape does not matter. A closing lid helps. Solid steel conduit bonded at both ends is effective. The spiral construction of flexible conduit makes it less attractive for RF shielding because the spiral shape forms an inductor, even with partially shorted turns.
Avoid splicing motor power cables when ever possible. Ideally, motor power cables should run continuous between the drive and motor terminals. The most common reason for splicing is to incorporate high-flex cable for continuous flexing applications.