You should be able to isolate into two groups any leads which have continuity with one another. The starting circuit is likely to isolate to two leads, the running circuit may have two or more leads that show continuity. If the running circuit has more than two leads, you will need to determine how those leads are to be used for voltage or speed changes.
A simple, experimental motor such as this is not capable of making much power. We can increase the turning force (or torque) that the motor can create in three ways: either we can have a more powerful permanent magnet, or we can increase the electric current flowing through the wire, or we can make the coil so it has many "turns" (loops) of very thin wire instead of one "turn" of thick wire. In practice, a motor also has the permanent magnet curved in a circular shape so it almost touches the coil of wire that rotates inside it. The closer together the magnet and the coil, the greater the force the motor can produce.Parent Post