Other Wiring / September 8, 2017 / Anaelle Huston.
The colors or numbers themselves are often a clue, but they alone may not provide sufficient information. There is always the trial and error method, but I do not recommend that because of the potential for destructive results. Instead, the Motor Doctors suggestion is to equip yourself with an ohmeter (don nott settle for just a continuity tester) and learn to perform a few simple tests with it.
A ferrite sleeve around the three power conductors as they leave the drive will help to reduce common-mode noise current. Take all three conductors two or three times through the core. If it runs hot reduce the number of turns.
Motor cables are defined as long when the motor frame is not bonded close enough to the drive panel to be considered a single ground plane. To be considered a single ground plane, the parts must be connected by a surface which is no longer than ten times its width.
In our experience, we disassemble, repair and reassemble objects we can see and touch. Our goal is a repair. However, to repair today vehicles, we must expand our understanding beyond things we can touch, see and use wrenches on. We must apply the technician approach to learning, information gathering and analysis.