You will need to use the ohmmeter as an ohmeter and not as a continuity checker for the next step in the procedure. You will want to use the lowest ohm scale your meter offers, as the typical winding resistance in motors such as these is less than 100 ohms. If the motor is a permanent split-capacitor motor, you are going to be looking for common and speed taps of the winding.
One way to overcome this situation is by using "magnetically soft" material. Magnetically soft material has atoms that readily reverse polarity (a docile herd?) when exposed to alternating current. Naturally, since the reversing process happens more quickly, there is less wasted energy.