Bonding should be by the widest practical means. Wide cable tray is effective when it is made of zinc plated steel and carefully bonded at the ends to control panel and motor frame. Zinc plated sheet steel channel is also effective. The fact that the width is folded into a U shape does not matter. A closing lid helps. Solid steel conduit bonded at both ends is effective. The spiral construction of flexible conduit makes it less attractive for RF shielding because the spiral shape forms an inductor, even with partially shorted turns.
You should be able to isolate into two groups any leads which have continuity with one another. The starting circuit is likely to isolate to two leads, the running circuit may have two or more leads that show continuity. If the running circuit has more than two leads, you will need to determine how those leads are to be used for voltage or speed changes.Parent Post