Car Wiring / November 9, 2017 / Ophelia Purdy.
The individual fuses in the box are usually numbered, so that sorting out which one may have blown is simplified by referring to the numbered list in the handbook. This should tell you which fuse protects which circuit. Where they are not numbered, take out each fuse in turn and see which component stops working.
To guard against this, ancillary circuits have fuses. The most common type of fuse is a short length of thin wire enclosed in a heatproof casing often glass. The size of the fuse wire is the thinnest that can carry the normal current of the circuit without overheating, and it is rated in amps.
However, it is always advisable to check the circuit also, in case a fault in it caused the fuse to blow. For example, failure of an electrical component or damaged insulation on a cable can cause a short circuit, resulting in a sudden massive increase in current.
Depending on the fuse design, it is sometimes possible to tell whether it has blown by holding it up against a light; a break in the wire inside may be visible. Another clue is blackening of the glass cover. If there is no visible sign, check by fitting another fuse of the same rating; if that cures the trouble, then the fuse was to blame.